1.Set Reader 2.2.13 to config 106. 2.Launch RSU installer #154. 3.Complete the upgrade in RSU installer. 4. Check the LSA/ESAsettings on the Readers by following serial command: $saconfig? actual result: $saconfig? returns 3. expected result: it returns 15. note: 1)the bit for $saconfig Enable Bit/ Numerical Value Description 0 – (1) ESA Detector 1 – (2) LSA Detector 2 – (4) ESA Corrector 3 – (8) LSA Corrector 2) $cu command for installer #154. ESAd = 0 ESAc = 1 LSAd = 1 LSAc = 1 wt = 1 wd = 14 disA = 0 disE = 0
Correction - expected result should be '14' ( LSA Detector(2) + ESA Corrector(4) + LSA Corrector(8) = 14)
I just tried it with build 701-141 (same cu command) and after the upgrade $saconfig? returned 14. Seems like that is the correct value 2 + 4 + 8 = 14 Did I get something wrong?
(In reply to comment #2) > I just tried it with build 701-141 (same cu command) and after the upgrade > $saconfig? returned 14. Seems like that is the correct value > > 2 + 4 + 8 = 14 > > Did I get something wrong? According to the latest configuration settings I HAVE. #141 would turn all ESA/LSA/ESD/LSD ON, that would be 1+2+4+8 = 15. is your configuration settings of #141 same as mine?
Sujit recently changed 141 to ESAd = 0 ESAc = 1 LSAd = 1 LSAc = 1 wt = 1 wd = 14 disA = 0 disE = 0
Verified, Below are the build details OS: Windows 10 Installer : 154 build:787